Category Archives: Main mailing list

What’s been keeping us busy?

Posted on February 10, 2012 by siertwijnia

Hi Everyone! Finally some communication again! We have been quiet for a while, not because we didn’t do anything, but because we were so busy with lots of things! Our plan is to communicate better and more! Let me summarize … Continue reading →

Posted in Main mailing list | 4 Comments

Working 3D printed helicopter blades

Posted on January 25, 2012 by Martijn Elserman

What do you do when you have your Ultimaker, you start experimenting. Taylor Alexander did some experiments and printed some very precise thin parts, rotor blades for his helicopter and they work perfectly. Whats next a bigger helicopter maybe?

Posted in Main mailing list | 4 Comments

Ultimaker is hiring!

Posted on December 11, 2011 by ErikDeBruijn

The Ultimaking Ltd. team is looking for dedicated, brilliant people who want to help us make a difference in how, and where, things are made! Are you, or do you know someone, who is just perfect for the job? Get … Continue reading →

Posted in Main mailing list | 1 Comment

3D Printing Event, follow up

Posted on October 27, 2011 by Martijn Elserman

Lots of people visited the 3D printing event during the Dutch Design Week in Eindhoven. A lot of Ultimaker operators printed and showed what they made. It was nice to meet you guys. 30 Ultimakers printing Joris with his portable … Continue reading →

Posted in Main mailing list | 13 Comments

Design contest, win an Ultimaker 3D printer

Posted on October 14, 2011 by Martijn Elserman

We’re giving away a complete Ultimaker 3D printer! The only thing you have to do is submit a great design to the contest. The first prize is an Ultimaker 3D printer and a 3D print of the design, 2nd Prize … Continue reading →

Posted in Main mailing list | 8 Comments

Ultimaker +

Posted on September 19, 2011 by Martijn Elserman

Specialy for the World MakerFaire we made Ultimakers in colors and an experimental Ultimaker +, build envelope 21x21x55cm. We took it to Time Square for a nice picture. Visited a Makerbot party with the Ultimakers, great guys, they let us … Continue reading →

Posted in Main mailing list | 22 Comments

Ultimaker at World MakerFaire New York

Posted on September 14, 2011 by Martijn Elserman

We will be at the World Maker Faire event in New York from september 17 to 18. Come and meet us at the 3D printer village. Beside some nice colored special edition Ultimakers there’s also a Ultimaker+ printing large parts. … Continue reading →

Posted in Main mailing list | 4 Comments

Ultimaker at Fab7 in Lima

Posted on August 25, 2011 by Martijn Elserman

Joris just handed over the Ultimaker to Bennito and Victor from the brand-new Fablab at the Faculty of Architecture in Lima. We built the printer last Tuesday at the Lima-lab within 5 hours, with almost 50 people participating As part … Continue reading →

Posted in Main mailing list, RepRap Blog of Blogs | 2 Comments

3D Printing Event

Posted on July 7, 2011 by ErikDeBruijn

The 3D printing event will be held on Tuesday 25 october 2011, during the dutch design week at the High Tech Campus[updated:] Seats2Meet, Strijp S in Eindhoven.[/updated] at Eindhoven, the Netherlands. The Conference (part of the event) will tackle social, … Continue reading →

Posted in Main mailing list | 6 Comments

more speed

Posted on June 23, 2011 by Martijn Elserman

The bright minds at Metalab Vienna started playing with their Ultimaker and decided to crank some more speed out of the little machine. Well they succeeded, by writing using some new controlling software, Printrun, with modified “Sprinter” firmware on the … Continue reading →

Posted in Main mailing list | 5 Comments