Category Archives: Main mailing list

Ultimaker at World MakerFaire New York

Posted on September 14, 2011 by Martijn Elserman

We will be at the World Maker Faire event in New York from september 17 to 18. Come and meet us at the 3D printer village. Beside some nice colored special edition Ultimakers there’s also a Ultimaker+ printing large parts. … Continue reading →

Posted in Main mailing list | 4 Comments

Ultimaker at Fab7 in Lima

Posted on August 25, 2011 by Martijn Elserman

Joris just handed over the Ultimaker to Bennito and Victor from the brand-new Fablab at the Faculty of Architecture in Lima. We built the printer last Tuesday at the Lima-lab within 5 hours, with almost 50 people participating As part … Continue reading →

Posted in Main mailing list, RepRap Blog of Blogs | 2 Comments

3D Printing Event

Posted on July 7, 2011 by ErikDeBruijn

The 3D printing event will be held on Tuesday 25 october 2011, during the dutch design week at the High Tech Campus[updated:] Seats2Meet, Strijp S in Eindhoven.[/updated] at Eindhoven, the Netherlands. The Conference (part of the event) will tackle social, … Continue reading →

Posted in Main mailing list | 6 Comments

more speed

Posted on June 23, 2011 by Martijn Elserman

The bright minds at Metalab Vienna started playing with their Ultimaker and decided to crank some more speed out of the little machine. Well they succeeded, by writing using some new controlling software, Printrun, with modified “Sprinter” firmware on the … Continue reading →

Posted in Main mailing list | 5 Comments

€1,- per minute design

Posted on June 15, 2011 by Martijn Elserman

3D printed open source design. Vases, bracelets, cups and so on. Made on demand, paid per minute… Joris van Tubergen has a great concept, he prints his designs while you wait. With a modified 0.8mm nozzle, he prints thick single … Continue reading →

Posted in Main mailing list | 4 Comments

The first Ultimakers shipped today

Posted on May 13, 2011 by Martijn Elserman

We worked very hard to get these shipped, we had a tight deadline for pickup but luckily we could reschedule it to the end of the day so more packages could be shipped out. We also sprayed our cool new … Continue reading →

Posted in Main mailing list | 20 Comments

Ultimaker production

Posted on May 9, 2011 by Martijn Elserman

We’re hard at work producing the Ultimakers for the people who ordered first. One of the workhorses is our lasercutter, which we use for cutting the plywood and perspex the Ultimaker is built of. It also marks the parts with … Continue reading →

Posted in Main mailing list | 6 Comments

Making jewelry from 3D prints

Posted on April 7, 2011 by Martijn Elserman

One of the early Ultimaker workshop participants, Paul Steenbrink (Cardillac) a Goldsmith, experiments with his Ultimaker to make jewelry, casted in gold or silver direct from the printed object. I didn’t know it is possible to cast directly from the printed … Continue reading →

Posted in Main mailing list | 6 Comments

Ultimaker available for pre-order

Posted on March 28, 2011 by Martijn Elserman

The last few months have been very busy ones for us, we done quite some testing with the Ultimaker, started a company, searched for the right material suppliers, worked on our webshop and so on. We initially planned to start … Continue reading →

Posted in Main mailing list | 45 Comments

Ultimaker TV debut

Posted on March 10, 2011 by Martijn Elserman

I’m not sure why we waited so long to post this on our site, but we had our debut on Dutch National TV. Erik was contacted (he’s the most visible one of us three) by De Wereld Draait Door to … Continue reading →

Posted in Main mailing list | 3 Comments